Cabletron Systems DMS-100 - Manual (Page 136)

136 Appendix C: Using FTP
297-8991-910 Standard 03.01 August 1999
Table 34 shows FTP operations for sessions started on a workstation for
connection to a DMS-100 switch. In this scenario, the DMS-100 switch is the
remote host and the workstation is the local host.
Table 34 FTP operations reference: workstation to DMS
Action Command sequence
FTP login WS> ftp IP_address
where
IP_address is the address of the remote host.
Enter a valid FTP userID and password to complete login.
Display the working directory of the
DMS WS> pwd
Change directories on the remote host
(DMS) WS> cd /path_name
where
path_name is a valid path from the current working
directory
i.e. cd /PATH_NAME
Change the working directory on the
local host (workstation) WS> lcd /directory
where
directory is a valid path from the current working directory
List the directory contents on the
remote host (DMS) WS> ls
Turn off automatic record length
detection WS>site autolrecl off
Turn on automatic record length
detection WS>site autolrecl on
List available active disk volumes WS>ls /
(Sheet 1 of 3)