Philips MATCHLINE 33CE7536 - Manual (Page 12)

№
DT
a
PIP
C5
a
Operating PIP
(with TV switched on)
Switching on:
• Press button B. The extra TV picture
appears in the last selected position
and is from the last selected source.
Note: When the TV is switched on with
the © POWER button, and
subsequently PIP with button B, the
extra TV picture appears in the top
right-hand corner of the screen. The
PIP picture is then the same as the
main picture.
Switching off:
• Press button B once again.
Source selection
Select required PIP source*
• Press button C3 to change a
connected (PIP) source. When
selecting a source with button C3, there
appears on the screen the name of the
source of the main picture and the
name of the source selected for PIP in
the form of a OSD indication.
* PIP sources
1. TV as PIP source (PIP picture
surround is blue).
2. PIP from EXT1 (PIP picture surround
is orange).
3. PIP from EXT2 (PIP picture surround
is purple).
4. PIP from EXT3 or EXT4 (dependent
on the setting of the source
selection buttons) (PIP picture
surround is green or red).
Note: If the video recorder is selected
as the source, you may select the
stored TV stations as PIP picture using
the programme selection buttons on
the video recorder.
IT C3
a
Freezing the PIP picture
• Press button C9. The PIP picture now
freezes.
• Press button (3 again to discontinue
the frozen PIP picture.
Note: The frozen picture can also be
discontinued by selecting another
source for the PIP picture.
Moving the PIP picture
• Press button 0. The PIP picture is
moved each time this button is
pressed.
Changing the picture
• Press button 0. The main picture is
exchanged with the PIP picture.
• Press button 0 again to change
further.