SoundMax SM-CSP121 - Manual (Page 3)

3
Mounting the subwoofer
Installation kits are available from your dealer or local stereo shop to help make your installation easy. These
kits also give your installation a clean, custom appearance. Questions about installations methods please
consult a professional auto sound dealer/installer for assistance.
· Choose the place of installation for the subwoofer. For most subwoofers stipulated regular places in the
automobile approach. In this case you need to know only assembly depth. Before installation the
subwoofer check up its assembly depth.
· Clean any metal shavings from the mounting area and check for areas in which water may enter the
subwoofer cavity. Treat the area for water protection when necessary.
If unit fails to operate properly
· Carefully read the instruction to make sure the unit is being operated properly. Check the following before
you take your unit to the local dealer for repair.
SYMPTOM POSSIBLE CAUSE SOLUTION
The volume control regulator set
in the minimal position
Adjust sound level No sound
The audio cassette receiver is
damaged Take your unit to the local dealer for
repair
Acoustic system cables are
connected without observance of
polarity (+ or -)
Check to see that all the power and
speaker leads are securely connected
Damage speaker wire or speaker Replace the speaker or speaker wires
Unnatural sound
The audio cassette receiver is
damaged Take your unit to the local dealer for
repair
NOTE: Good ground connections eliminate most electrical noise problems and require tight contact with the
metal vehicle chassis. Remove plastics, paint or rust for good electrical contact.