Software compatibility, Determining your software release, Updating to a new software release – Cisco 2600 User Manual
Page 6: Product number quick-reference list, Table3 feature pack product numbers, Use table 3, “feature pack product numbers
6 Release Notes for Cisco IOS Release 12.0(7)XK1 Feature Packs for Cisco 2600 Series Routers
Software Compatibility
Software Compatibility
The feature packs described in these release notes contain Cisco IOS Release 12.0(7)XK1 software
images, some earlier images, and RSL Version 7.6. Before running RSL, read the “Installing
Software Images Using RSL” section on page 17.
Determining Your Software Release
To determine the version of Cisco IOS software that is currently running on your Cisco 2600 series
router, enter the show version command. The version number is indicated on the second line:
Router> show version
Cisco Internetwork Operating System Software
IOS (tm) 2600 Software (C2600-i-mz), Version 12.0(5)T1, RELEASE SOFTWARE
The output includes further information such as processor revision numbers, memory amounts,
hardware IDs, and partition information.
Updating to a New Software Release
For information about upgrading to a new software release, see the Cisco IOS Software
Release 12.0 T Upgrade (#819: 1/99) product bulletin located on CCO at:
Service and Support > Product Bulletins > Software
Under Cisco IOS 12.0, click Cisco IOS Software Release 12.0 T Upgrade (#819: 1/99).
This product bulletin does not contain information specific to Cisco IOS Release 12.0(7)XK1, but
provides general upgrade information that may apply to this release.
Product Number Quick-Reference List
Table 3 lists Cisco product numbers for the feature packs supported in this release.
Table 3
Feature Pack Product Numbers
Product Number
Feature Pack Description
CD26-C-12.0.7=
Cisco 2600 IP Feature Pack
CD26-CH-12.0.7=
Cisco 2600 IP/FW
1
Feature Pack
CD26-CP-12.0.7=
Cisco 2600 IP Plus Feature Pack
CD26-CHL-12.0.7=
Cisco 2600 IP/FW Plus IPSec 56 Feature Pack
1 2
CD26-CK2-12.0.7=
Cisco 2600 IP Plus IPSec 3DES Feature Pack
CD26-CHK2-12.0.7=
Cisco 2600 IP/FW Plus IPSec 3DES Feature Pack
CD26-CL-12.0.7=
Cisco 2600 IP Plus IPSec 56 Feature Pack
CD26-B-12.0.7=
Cisco 2600 IP/IPX/AT/DEC Feature Pack
CD26-BP-12.0.7=
Cisco 2600 IP/IPX/AT/DEC Plus Feature Pack
CD26-BHP-12.0.7=
Cisco 2600 IP/IPX/AT/DEC/FW Plus Feature Pack
CD26-AP-12.0.7=
Cisco 2600 Enterprise Plus Feature Pack
CD26-AL-12.0.7=
Cisco 2600 Enterprise Plus IPSec 56 Feature Pack
CD26-AHK2-12.0.7=
Cisco 2600 Enterprise/FW Plus IPSec 3DES Feature Pack