Operation – Chicago Electric 95000 User Manual
Page 4
Page 4
SKU 95000
For technical questions, please call 1-800-444-3353.
OpERAtiOn
Figure 1
Leg
Solar Charger (1)
1. Unfold the Solar Charger. Open the “support legs” on the backs.
See Figure 1.
Place the Charger in a position that can receive direct sunlight without shade. Turn
2.
the Solar Charger toward the sun. The blue LED will go on (or flash) whenever the
Solar Charger is generating electricity. A blocking Diode in the Solar Charger helps
to ensure that it will not drain your battery. If the weather is cloudy or if the charger
is even partially shaded, the output will be drastically reduced.
Identify the Adapter charger connection you need.
3.
See Figure 2.
Plug the adaptor to the Power Cord on the Solar Charger.
4.
Connect the correct Adapter (2 through 5) to the device you are powering.
5.
Cordless
Tool Charging
Connector (6)
Charging Base
Adapter (2)
Alligator Clamp
Adapter (3)
Cigarette Lighter
Receptacle
Adapter (4)
Cigarette
Lighter Plug
Adapter (5)