Canon IP ReadyTM Series Video Alarm FDP75C12N - Manual (Page 5)

-  -
INSTALLING QUICK RELEASE BRACKETS
AXIS 213
2539 Mounting Plate:
1. Install the camera to the 2539 mounting plate using
(2) 10-32 screws and lockwashers provided.
2. The Axis 213 camera requires 3.5" of spacing for optimal
position within the housing. Use (4) 2" spacer(s), plus
(4) 1" spacer(s) and (4) ½" spacer(s) provided in the (2)
hardware packets.
Attach camera using these (2) holes
½"
1"
2"
Captive Screw
(3) screws
in housing
3. Place (3) 8 x 32 x s Phillips head screws on the top
of the spacer as shown above. Be sure to place the
screws so that they line up with the open slots on the
mounting plate.
4. Slide the mounting plate with camera into position on
top of spacers. Secure 3 screws and captive fastener.