Casio YW2L - Manual (Page 19)

19
Subsequent Wireless LAN Connection between the Data
Projector and Four Computers
Important!
You can use the following procedure when the following condition exists.
z You already have performed the procedure under “First Wireless LAN Connection
between the Data Projector and Four Computers” (page 11), and that you have not
changed the Data Projector and/or computer settings since then.
To establish a wireless LAN connection between four computers and the
Data Projector using the same settings as the last connection
1 Turn on the Data Projector and connect the CASIO YW-2 wireless adapter to the
Data Projector’s USB port.
z This will start up Wireless automatically and display the “Standing by for connection...”
message on the projection screen.
2 Turn on the first computer and start up Windows.
3 On the first computer, start up Wireless Connection 2.
z When the computer finds the Data Projector, a Connection dialog box will appear.
4 Move the highlighting to the Data Projector to which you want to connect and
then click the [OK] button.
z This will close the Connection dialog box and display the Wireless Connection 2 window.
5 On the Wireless Connection 2 window, click one of the projection area position
buttons and then click the
button.
z This will cause the contents of the computer screen to be projected so they fill the
entire projection area.
6 Repeat steps 2 through 5 for all of the other computers.
7 On the Data Projector’s remote controller, press the [ ] key.
z This will display the user list screen, which shows thumbnails of the screen contents of
each connected computer.
8 On the Data Projector’s remote controller, use the [
S], [T], [W] and [X] keys to
select one of the thumbnails and then press the [ENTER] or [ ] key.
z This will cause the contents of the selected computer screen to be projected so they fill
the entire projection area.