Philips DV900VHS0I User Manual
Page 9
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Hookups Without a Cable BoxIDirect Broadcast System (confd) 9
3
Connect the RF coaxial cable (supplied) to the ANTIN (Antenna In) Jack on the
back of the DVD/VCR and to the ANTENNA IN Jack on the TV.
(You may use
either a snap-on type (supplied) or screw-on type of coaxial cable, whichever you prefer.)
ANTENNA IN Jack
(on back of TV)
example only
4
Plug in the TV at\d the DVD/VCR.
5
Set the CH3/CH4 switch on the back of the DVD/VCR to CHS or CH4,
whichever channel is not used or least used in your area.
Set the TV to the same
channel.
For example, when playing a tape, if the CH3/CH4 switch is set to CH3, the TV
should be on channel 03.
You are ready to turn on the DVD/VCR. Please go to page 16 before turning
on the DVD/VCR.