CDA FREESTANDING TUMBLE CI521 - Manual (Page 5)

Use And Controls
A. The timer - turn the timer knob clockwise until the required programme
around the timer knob is selected.
B. Heat setting - select gentle or intensive heat as recommended on the
control panel
C. Start - press the start button after selecting the required drying time.
• Sort out the clothes into groups of similar fabrics and colours. Check the care label inside the garment. We suggest
that fabric conditioner be used to reduce static electricity. Delicate articles e.g. tights should be placed inside a
pillowcase. It is better to dry small and large articles together.
• Open the door.
• Load clothes loosely into the drum.
• Load sheets first starting with one corner.
• Close the door.
• Dry your hands.
• Check the timer is in the’0’ position.
• Switch on the machine.
• Select correct heat position (See programme around the timer on fascia panel).
• Set the timer to the correct position (See programme around the timer on fascia panel).
• Press the start button.
• The drum will now begin to rotate and will stop automatically when the timer reaches the ‘0’ position.
• Once the clothes are removed, clean the filter
• Switch off the electricity supply.
Should the clothes become dry before the cycle has finished the thermostat will automatically switch off the heater and
prevent over drying and save energy although the drum will still rotate.
When drying large items such as sheets, we suggest you stop the dryer to redistribute the load.
To stop the machine during the middle of a programme, open the door: the drum will stop rotating automatically and
reset when you close the door.
To lengthen or shorten the programme, turn the timer knob.
The final part of the drying cycle occurs without heat (cool down cycle) to ensure that the items will not be damaged.
Care labels you may find on your fabrics
fig. 1
3
‘Suitable for tumble drying’
‘Do not tumble dry’
‘Dry flat’