ConnectPRO Master-IT USB+ PRO-12UL - Manual (Page 2)

PRO-12UL User Guide
USB Hub Port:
The PRO-12UL includes a Hub port which allows you to connect an additional USB device such as a
printer or scanner. This 3
rd USB port is located on the left side of the switch, by the power connector.
** Keep in mind devices connected to this port are only accessible
by the computer selected on the KVM switch. **
What are included:
• 2-port USB KVM switch x 1
• 6-ft or 3-ft all-in-1 USB combo cable x 2
• DC 5V 2A switching power adapter x 1
• weight-loader x 1
• Screw for weight loader x 2
Support:
toll-free: 888-999-1983 (in USA) , 8:30 a.m. ~5:30 p.m. Monday.~ Friday.
email: [email protected]
web site: www.connectpro.com
Skype: connectpro_support
Address: 20525 Paseo Del Prado, Walnut, CA 91789, USA.
power
connector
weight-loader
USB Hub Port
• Default= OFF
This “on/off switch” is only for the OLD
PS/2 USB systems which DO NOT
have native USB configuration.