Compatible Systems DS3 - Manual (Page 5)

Introduction to the DS3-Quad 10/100 RIOP 1
Introduction to the DS3-Quad 10/100 RIOP
The DS3-Quad 10/100 Routing Input/Output Processor (RIOP), as part of the VSR multigi-
gabit switching router, allows you to connect a remote corporate network and up to four local
Ethernet segments. The DS3 interface has a data capacity of 44.736 Mbps, while the Ethernet
interfaces can operate at either 10 Mbps or 100 Mbps.
This section of the manual contains information specific to the DS3-Quad 10/100 RIOP. It is
divided into the following sections:
Chapter 1: Network Installation
Here you will find step-by-step instructions on how to physically install the DS3-Quad 10/100
and connect it to your network.
Chapter 2: Quickstart Configuration
The Quickstart section provides a basic list of parameters that must be entered into the
DS3-Quad 10/100 for proper operation.
Chapter 3: Shipping Defaults
This section of the manual lists factory defaults for each interface.
Chapter 4: LED Patterns
This section of the manual describes the LED indicators for the DS3-Quad 10/100.