Cobra Electronics PR3000DXC - Manual (Page 7)

Intro Operation Customer
Assistance Warranty
Notice
Main Icons
Secondary Icons
Intro Operation Customer
Assistance Warranty
Notice
Main Icons
Secondary Icons
Customer Assistance Warranty Introduction
5 Nothing comes close to a Cobra ™
Operation
Intro Operation Customer
Assistance Warranty
Notice
Secondary Icons
4 English
Using Your Radio
Volume
•
To adjust the volume:
1. Rotate the On/Off Volume knob.
Call Button
•
To alert another person that you are calling:
1. Press and release the Call button.
The other person will hear a two second call
tone. You cannot send or receive transmissions
during the two second call tone.
See page 14 on how to select
between 10 call tone settings.
Selectable High•Low Power Output
•
When in close proximity to another party or
during favorable conditions, you can switch
from High to Low Power to extend battery life.
This feature applies to GMRS Channels
1 through 7 and 15 through 22 only.
Channels 8 through 14 operate
exclusively on low power.
To switch from high to low power:
1. Press and release the Hi•Low button.
When in high power and using Channels
1 through 7 and 15 through 22, the Hi icon
will be visible on the display.
When in low power and when using Channels
8 through 14, the Low icon will be visible on
the display.
Display Illumination
•
To illuminate your display:
1. Press and release the Light/Max Range button
to illuminate the display for 10 seconds.
Low Power Icon
Hi Power Icon
Operation
Intro Operation Customer
Assistance Warranty
Notice
Secondary Icons
Hi•Low Button
Auto Squelch/Maximum Range
•
Your microTALK ® radio is equipped with Auto Squelch,
which automatically shuts off weak transmissions and
unwanted noise due to terrain, conditions or if you’ve
reached your Maximum Range limit.
You can temporarily turn off auto squelch or turn on
maximum range extender, allowing all signals to be
received and extending the maximum range of your radio.
To temporarily turn off auto squelch:
1. Press the Light/Max Range button less
than five seconds.
If you hear two beeps, you have turned
the maximum range extender on (see below).
To turn maximum range extender on:
1. Press and hold the Light/Max Range
button for at least five seconds until you
hear two beeps which indicates the
maximum range extender is on.
To turn maximum range extender off:
1. Press and release the Light/Max Range
button or change channels.
Lock Function
•
The Lock button locks the Channel, Mode and
Hi•Low Power buttons to prevent accidental operation.
To turn the lock button on or off:
1. Press and hold the Lock button for
two seconds.
A double beep sound is used to confirm your
lock on or off request. When in Lock mode,
the Lock icon will be displayed.
Light/Max Range
Light/Max Range
Lock Button
Lock Mode
Volume Knob
Call Button