Canon IMAGERUNNER 2020 - Manual (Page 210)

Paper Drawers 7-8
Rou
tin
e Ma
int
ena
nce
7
3
Detach the end guide and reattach it to the slots with the mark
indicating the desired paper size.
Detach the end guide by pressing down and forward. Align the end guide with
the mark indicating the desired paper size. Reattach the end guide by tilting it
forward and inserting the tabs at both ends into the slots. The end guide should
then be returned to its vertical, upright position.
NOTE
• Attach the end guide while pressing down the point indicated with 'A'.
• When you set for 11" × 17" paper, attach the end guide to the 11" × 17" indicator on
the rear right side of the paper drawer.
4
Lift the lock lever on the side guide to its upright position and
slide the side guide to the groove marked for the desired
paper size.