Canon IMAGERUNNER 2020 - Manual (Page 100)

Card Reader-E1 4-16
Op
ti
ona
l Eq
uipm
ent
4
Card Reader-E1
If the Card Reader-E1 is attached to the machine, you must insert a control card to
operate it. The Card Reader-E1 performs Department ID Management
automatically.
NOTE
• If the Standby display does not appear when the control card is inserted, make sure that:
- The control card is inserted in the correct direction.
- The control card is inserted as far as it can go.
- An unusable control card is not inserted. (For example, cards which are damaged or
cards prohibited from use.)
• Insert a usable control card correctly.
• For instructions on turning the power ON, see "Main Power and Control Panel Power," on
p. 1-20.
• If the Card Reader-E1 is attached, only the type of card shown below can be used. An
optical type card can manage up to 300 departments.
Optical Type Card