Canon IMAGERUNNER 2020 - Manual (Page 103)

Card Reader-E1 4-19
Op
ti
ona
l Eq
uipm
ent
4
Department ID Management
This section describes how to change the password and page limit, and how to
check the print totals when a control card is being used.
NOTE
• The maximum number of digits that you can store for the password is seven. If you enter
fewer than seven digits, the machine stores the password with leading zeros.
- Example: If <321> is entered, <0000321> is stored.
• You can set the page limit from 0 to 999,999 pages.
Changing the Password and Page Limit
1
Press [Additional Functions].
2
Press [ ] or [ ] until <SYSTEM SETTINGS> appears
➞
press [OK].
If the System Manager ID and System Password have been set, enter the System
Manager ID and System Password using the numeric keys
➞ press
(ID).
The <SYSTEM SETTINGS> menu appears.
3
Press [ ] or [ ] until <MANAGE DEPT. ID> appears
➞
press [OK].
The <MANAGE DEPT. ID> menu appears.
Additional
Functions
ADD. FUNCTIONS
1.COMMON SETTINGS
OK
ID
ADD. FUNCTIONS
9.SYSTEM SETTINGS
SYSTEM SETTINGS
1.SYS. MANAGER INFO
OK SYSTEM SETTINGS
3.MANAGE DEPT. ID
MANAGE DEPT. ID
ON