Canon IMAGERUNNER 2020 - Manual (Page 144)

Specifying Common Settings 5-28
Customizing Settings
5
Output Tray Designation
You can designate the machine’s output trays to be used for specific functions. The
output trays are indicated by Tray A and Tray B.
IMPORTANT
The Tray Designation mode is available only if the optional Finisher-U1 and Additional
Finisher Tray-C1 or Inner 2 Way Tray-E1 are attached to the machine.
NOTE
• If heavyweight paper or transparencies are loaded in the stack bypass, they will be output
to Tray B regardless of the Tray Designation settings. Plain paper, however, can be output
to either Tray A or B.
• If you set both trays to 'ON' for a single function, Tray B has the priority.
• The same output tray can be designated for multiple functions.
• The default setting is 'ON' for all functions.
Options Attached Default Settings Tray A and B
Finisher-U1 and
Additional Finisher Tray-C1
Tray A: PRINTER, FAX, and
OTHER
Tray B: COPY
Inner 2 Way Tray-E1
Tray A: PRINTER, FAX, and
OTHER
Tray B: COPY
A
B
A
B