Canon IMAGERUNNER 2020 - Manual (Page 149)

Specifying Common Settings 5-33
Customizing Settings
5
NOTE
• <TRANSPARENCY> can be selected only if <LTR> is selected as the paper size.
• If you select <TRANSPARENCY> or <LABELS>, Staple in the finisher mode is
ignored.
• For more information on paper types, see "Available Paper Stock," on p. 2-24.
8
Press [Stop] to return to the Standby display.
Setting the Speed or Print Side Priority
You can set whether the printing speed is the priority for your job, or whether to print
on a specific side of the paper. This is useful when you want to make one- or
two-sided prints on preprinted paper (paper which has logos or patterns already
printed on it) without changing the orientation of the paper loaded in paper source.
NOTE
The default setting for all paper sources is 'SPEED PRIORITY'.
1
Press [Additional Functions]
➞ [
] or [ ] until
<COMMON SETTINGS> appears
➞ press [OK].
If necessary, see the screen shots in steps 1 and 2 of "Initial Function at Power
ON," on p. 5-15.
The <COMMON SETTINGS> menu appears.
2
Press [ ] or [ ] until <PAPER FEED SWITCH> appears
➞ press [OK].
The <PAPER FEED SWITCH> menu appears.
Stop
OK
Additional
Functions
OK COMMON SETTINGS
11.PAPER FEED SWITCH
PAPER FEED SWITCH
1.STACK BYPASS