Canon IMAGERUNNER 2020 - Manual (Page 172)

Specifying the System Manager Settings 6-5
Syst
em
M
ana
ge
r
Set
tin
gs
6
4
Enter a number (up to seven digits) using the numeric keys
➞
press [OK].
The System Password is stored, and the screen returns to the <SYS. MANAGER
INFO> menu.
NOTE
If you make a mistake when entering the password, press (Clear) to clear the
entire password
➞ enter the correct password.
5
Press [Stop] to return to the Standby display.
System Manager’s Name
Follow the procedure below to set the System Manager’s name.
1
Press [Additional Functions]
➞ [
] or [ ] until
<SYSTEM SETTINGS> appears
➞ press [OK].
If necessary, see the screen shots in steps 1 and 2 of "System Manager ID," on p.
6-2.
If the System Manager ID and System Password have been set, enter the System
Manager ID and System Password using the numeric keys
➞ press
(ID).
The <SYSTEM SETTINGS> menu appears.
2
Press [ ] or [ ] until <SYS. MANAGER INFO> appears
➞ press [OK].
If necessary, see the screen shots in step 3 of "System Manager ID," on p. 6-2.
The <SYSTEM MANAGER INFO> menu appears.
OK
2 3
ABC DEF
JKL GHI MNO
TUV PQRS WXYZ
Tone
4 5 5 6
7 8 9
0
1
#
SYMBOLS
SYSTEM PASSWORD
1234567
SYS. MANAGER INFO
3.SYSTEM MANAGER
C
Stop
OK
Additional
Functions
ID
OK