Canon IMAGERUNNER 2020 - Manual (Page 193)

Remote UI 6-26
Syst
em
M
ana
ge
r
Set
tin
gs
6
Remote UI
You can set whether to enable the Remote UI (User Interface) to operate the
machine and change settings.
The imageRUNNER 2020/2016 comes standard equipped with a direct Ethernet
connection interface. Once the Ethernet interface port is configured properly, the
imageRUNNER 2020/2016 can be controlled and set up through the Remote UI
and network. You can also use the Remote UI to fax from your computer using the
Ethernet connection.
NOTE
• For more information on the Remote UI, see the Remote UI Guide.
• For instructions on configuring the Ethernet port, see the Network Guide.
• The default setting is 'ON'.
1
Press [Additional Functions].
The Additional Functions menu appears.
2
Press [ ] or [ ] until <SYSTEM SETTINGS> appears
➞
press [OK].
If the System Manager ID and System Password have been set, enter the System
Manager ID and System Password using the numeric keys
➞ press
(ID).
The <SYSTEM SETTINGS> menu appears.
3
Press [ ] or [ ] until <REMOTE UI> appears
➞
press [OK].
The <REMOTE UI> menu appears.
Additional
Functions
ADD. FUNCTIONS
1.COMMON SETTINGS
OK
ID
ADD. FUNCTIONS
9.SYSTEM SETTINGS
SYSTEM SETTINGS
1.SYS. MANAGER INFO
OK SYSTEM SETTINGS
7.REMOTE UI
REMOTE UI
ON