Canon IMAGERUNNER 2020 - Manual (Page 228)

Routine Cleaning 7-26
Rou
tin
e Ma
int
ena
nce
7
Manual Feeder Cleaning
If your originals have black streaks or appear dirty after copying them using the
feeder, this may be caused by pencil writing rubbing off the originals and onto the
roller. Perform this feeder cleaning procedure to clean the feeder scanning area,
film, and roller.
IMPORTANT
• Do not dampen the cloth too much, as this may damage the original or break the
machine.
• If the feeder scanning area is dirty, it may result in a paper jam or blemished print output.
NOTE
Clean the roller while spinning it with your hand.
1
Open the feeder cover.
2
Clean the rollers (a total of three places) inside the feeder
cover with a cloth dampened with water. Then wipe the area
with a soft, dry cloth.