Adjusting the machine, Print quality and density improvement, Adjusting the machine -35 – Canon IMAGERUNNER 2020 User Manual
Page 237: Print quality and density improvement -35, P. 7-35
Adjusting the Machine
7-35
Rou
tin
e Ma
int
ena
nce
7
Adjusting the Machine
This section describes the settings to improve the print quality and to prevent paper
jams which may occur when a variety of functions are used.
Use of these settings will help to prevent a number of problems before they occur.
Print Quality and Density Improvement
If print quality decreases or an irregularity of the print density appears, the
transcription output may not work adequately. Use Special Mode M to improve the
print quality or irregular print density.
1
Press [Additional Functions].
The Additional Functions menu appears.
2
Press [
] or [
] until <ADJUST./CLEANING> appears
➞
press [OK].
The <ADJUST./CLEANING> menu appears.
3
Press [
] or [
] until <SPECIAL MODE M> appears
➞
press [OK].
The <SPECIAL MODE M> menu appears.
Additional
Functions
ADD. FUNCTIONS
1.COMMON SETTINGS
OK
ADD. FUNCTIONS
7.ADJUST./CLEANING
ADJUST./CLEANING
1.TRANS. ROLR CLEAN
OK
ADJUST./CLEANING
5.SPECIAL MODE M
SPECIAL MODE M
MID