Canon IMAGERUNNER 2020 - Manual (Page 90)

System Configuration 4-6
Op
ti
ona
l Eq
uipm
ent
4
Available Combination of Options
This table describes the optional equipment that is needed to use each function,
the available combination of options that can be installed simultaneously, and the
limitations when installing optional equipment.
Machine Function
Optional Equipment
Needed
Simultaneous Installation
Required Limitations
Copy Function
Platen Cover Type J
or Feeder (DADF-P1)
–
The Platen Cover
Type J and Feeder
(DADF-P1) cannot be
installed together. If
only the Platen Cover
Type J is attached,
some functions may
be unavailable.
Fax Function
Platen Cover Type J
or Feeder (DADF-P1)
–
The Platen Cover
Type J and Feeder
(DADF-P1) cannot be
installed together. If
only the Platen Cover
Type J is attached,
some functions may
be unavailable.
Super G3 FAX Board – –
Fax Panel-A1 – –
PCL Printer Function PCL Printer Kit-J1 – –
Additional Copy Tray
Inner 2 Way Tray-E1 –
The Inner 2 Way
Tray-E1 cannot be
used with the
Finisher-U1.
Additional Finisher
Tray-C1
–
The Finisher-U1 must
be activated.
Collate
Group
Offset
Staple
Finisher-U1 –
The Inner 2 Way
Tray-E1 cannot be
used with the
Finisher-U1.