Casablanca Fan Company Bel Air Tabletop Fan - Manual (Page 8)

8
TILT THE
FAN TO
INSTALL
LAST
CANOPY
SCREW
Step 9. Tuck the wires into the canopy
with the wire nuts pointed upwards,
so that the WHITE and BLACK wires are
on opposite sides of the canopy and
all wires are clear of the canopy open-
ing.
Step 11. Straighten the fan, then check
to ensure that there is no movement
between the canopy and ceiling or
Hang-Tru ball and top support shaft.
Step 10. Install canopy hatch with the
last canopy screw and lock washer. To
do this, tilt the fan body away from
the hatch opening.
CANOPY HATCH INSTALLATION
WIRE NUT
WHITE WIRES
(2)
GREEN WIRES
(3)
Step 8. Attach the fan wires to the
ceiling fixture outlet box wiring by
twisting the bare ends of the wires to-
gether and then securing with a wire
nut.
Connect in this order:
• GREEN leads from mounting plate
and fan to GROUND conductor of
power source. Secure with wire nut.
• WHITE wire from fan to white NEU-
TRAL wire in ceiling fixture outlet
box. Secure with wire nut.
• BLACK wire from fan to black (or red)
POWER wire in ceiling fixture outlet
box. Secure with wire nut.
CANOPY ELECTRICAL CONNECTIONS
HANGING THE FAN
Step 7. To hang the fan body in the
canopy, hold the fan body firmly and in-
sert the ball into the canopy opening.
Check that no wires were pinched. Rotate
the fan body until the slot in the ball fits
into the pin opposite the canopy open-
ing.