Cary Audio Design 7.25 - Manual (Page 8)

INTRODUCTION
PRODUCT REGISTRATION
If you are the original purchaser of this unit and you purchased it in the United States, you
should fill out the enclosed warranty registration card and return it to Cary Audio Design within
15 days of your purchase. Cary Audio Design also suggests that you keep your original packing
cartons in case you ever need to ship the unit when moving to a new home. Warranty
restrictions apply. Consult the warranty section of this manual for details. Please be certain to
keep a copy of the original sales receipt from your Authorized Cary Audio Design dealer to
validate the warranty if ever needed.
OUTSIDE THE USA : Your local Authorized Cary Audio Design Distributor will make his own
warranty policy for your country. Please check with them for the terms of warranty for your
new amplifier.
INSTALLATION CONSIDERATIONS
This section describes the unpacking and installation procedures for your new
component.
Unpacking
All Cary Audio Design shipping cartons have been specially designed to protect their contents and
special care has been taken to prevent damage under normal shipping conditions. Mishandling
should be evident upon inspection of the shipping container. If shipping damage is found after
visual inspection, take care not to destroy the evidence. If necessary, document the damage with
photographs and contact the transport carrier immediately.
Carefully remove your new component from its packing carton and examine it closely for signs of
shipping damage. We strongly recommend saving all original packing cartons to protect your
component from damage should you wish to store it or ship it for after-sales service.
To ensure optimal performance, pay particular attention to instructions below and to other
precautions that appear throughout this user guide.
DO be careful when moving the amplifier, as it is quite heavy.
DO install the Model 7.250 on a solid, flat, level surface such as a table or shelf. The Model 7.250
can also be installed in a standard 19-inch equipment rack using an optional rack-mount kit
available from an authorized Cary Audio Design dealer.
DO NOT install the Model 7.250 on a surface that is unstable or unable to support all four
feet.
DO select a dry, well-ventilated location out of direct sunlight.
7