Cary Audio Design CAD-805AE - Manual (Page 10)

INSTALLATION
UNPACKING
This section describes the proper unpacking and installation procedures for your new
component.
Unpacking
All Cary Audio shipping cartons have been specially designed to protect their contents and
special care has been taken to prevent damage under normal shipping conditions. Mishandling
should be evident upon inspection of the shipping container. If shipping damage is found after
visual inspection, take care not to destroy the evidence. If necessary, document the damage
with photographs and contact the transport carrier immediately.
Carefully remove your new component from its packing carton and examine it closely for signs of
shipping damage. We strongly recommend saving all original packing cartons to protect your
component from damage should you wish to store it or ship it at a later date.
In the Box
When unpacking your CAD-805AE amplifier, make sure the following accessories are
included. You should find the following items within the box:
• Power Cable
• Owner’s Manual
• Warranty Card
• Complete Tube Set (refer to “tube compliment” in SPECIFICATIONS section)
• Bias Meter
WARRANTY CARD
IN THE USA: If you are the original purchaser of a new unit purchased from an authorized Cary
Audio dealer, please fill out the enclosed warranty registration card and return it to Cary Audio
within 15 days of your purchase. Cary Audio also suggests that you keep your original packing
cartons in case you ever need to ship the unit. Warranty restrictions apply. Consult the warranty
section at the end of this manual for details. Please be certain to keep a copy of the original sales
receipt from your direct purchase from Cary Audio or your authorized Cary Audio dealer to
validate the warranty if ever needed. The warranty is for the original purchaser only and does not
transfer to any subsequent owner.
OUTSIDE THE USA: Your local authorized Cary Audio distributor will make his own warranty
policy for your country. Please check with them for the terms of warranty for your new amplifier.
PLACEMENT
In general, the location of your new CAD-805AE is not critical. Certain precautions must be taken
to ensure optimum performance. Avoid extremely hot locations such as near radiator or other
heating units. Keep the top of the CAD-805AE clear of books, paper or other equipment to
protect against overheating.
9