Char-Broil COMMERICAL 463248708 - Manual (Page 21)

14
Tank heat shield
Inside of cart, insert tank heat shield tabs into two left slots between upper and lower back panels. Attach left and center front
shield tabs under door brace with
#8x3/8” self-tapping screws. Insert left and right grease tray rails into slots beneath grease
tray opening in upper back panel. Attach left rail and right front shield tab together under front brace with a #8x3/8” self-
tapping screw, then attach right rail to brace, also with a
#8x3/8” self-tapping screw.
Left grease
tray rail
Right grease
tray rail
#8x3/8” self-
tapping screw
Door brace
Some components
not shown for
illustration purposes.
Rear
of shi
eld -
two
tabs
.
Fron
t of shie
ld - th
ree t
abs.
Grease tray
opening
Tank Wire
A
B
15 Insert end of tank wire (without hole) into back of lower back panel. Attach other end to bottom of front brace with a
#8x3/8” self-tapping screw.
463248708 • 21