Canon FB330P/FB630P - Manual (Page 72)

72
own parallel port drivers, such as Epson inkjet printers, to the scanner’s
printer port will cause the scanner or printer to malfunction. Such printers
must be handled as follows:
NOTE
• Contact the manufacturer to find out whether or not your printer uses
the standard Windows parallel port driver.
• Using Canon Printers
Use the following printer settings when connecting a LIPS4 printer to the
scanner’s printer port.
How to Adjust the Settings
1. Click the Windows [Start] menu and select [Settings] and [Printers].
2. Click the icon of the printer to select it. Click the [File] menu in the
window and select [Properties].
3. In the printer’s properties dialog, select the [Details] tab and click the
[Spool Settings] button.
4. Click the “Start printing after last page is spooled” option to make it
active and click the [OK] button.
5. Click the [OK] button in the properties dialog.
• Using Epson Printers
It is advisable to adjust the Spool Manager settings as follows to avoid
mis-operation of the scanner during printing. (This procedure is not
necessary on computers running Windows NT 4.0.)