Cobalt Networks openGear 9252 - Manual (Page 12)

12
LEDs
The front-edge of the card features LEDs that display the status of the input signals.
As selections are made in the menus, (refer the subsequent chapter for complete menu
descriptions), the LEDs display the status of the input signals. Descriptions are provided in the
following table:
LED Color Location Display and Description
Lock Green
Top of the
card When illuminated there is a valid AES/EBU signal at the input.
No Lock Red
Second
from the
top When illuminated a valid AES/EBU signal is not present
EQ Yellow
Third from
the top
When illuminated this indicates that the cable EQ has been inserted
by pressing SW1 or that feature has been enabled through
Dashboard.
Com
Activity
Green
Fourth from
the top When illuminated this indicates that the 9252 is communicating to
Dashboard through the CAN bus.
Error Red
Fifth from
the top When illuminated this indicates that there is an error in the
communications to Dashboard through the CAN bus.
Table 1. Status LED Descriptions