Corinex Global VoIP USB Phone - Manual (Page 36)

33
Using the Corinex Softphone software
Corinex VoIP USB Phone User Guide
4.3.4 Configuration of the Softphone
The configuration dialog can be accessed by clicking on the Menu button.
It consists of four sections.
1. Account settings
Here you can set up the authentication settings for your VoIP account. You
can select one of the predefined VoIP service providers for an easy setup
of account and connection settings, or select Custom settings if your
provider is not in the list. All you need to enter is the Account name (which
will be displayed on the Softphone’s display when you will be connected
to your provider), Number and Password. Some providers (e.g. Ecuity)
require additional authentication information - the Login field. In case your
provider gave you a login, along with the number and password, please
enter it into the Login field. Otherwise, you can leave the field empty. If
you use a predefined provider profile, it may happen that the Login field is
greyed-out and you cannot edit it. This means, the provider doesn’t require
this information. You may enter your nickname into the Nickname field,
which will be your caller ID when dialing a number.