Save these instructions – Intex Volleyball Set For Rectangular Metal Frame Pool 2012 User Manual

Page 3

Advertising
background image

(52PO) ENGLISH POOL VOLLEYBALL SET MANUAL (FOR RECTANGULAR METAL / ULTRA FRAME POOL) SIZE: 4.875” X 7.25” PANTONE 295U 07/10/2008

52PO

SAVE THESE INSTRUCTIONS

Page 6

(52PO) ENGLISH POOL VOLLEYBALL SET MANUAL (FOR RECTANGULAR METAL / ULTRA FRAME POOL) SIZE: 4.875” X 7.25” PANTONE 295U 07/10/2008

52PO

SAVE THESE INSTRUCTIONS

Page 5

SS

EE

TT

--UU

PP

II

NN

SS

TT

RR

UU

CC

TT

IIOO

NN

SS

POOL VOLLEYBALL SET UP (continued)

SS

EE

TT

--UU

PP

II

NN

SS

TT

RR

UU

CC

TT

IIOO

NN

SS

POOL VOLLEYBALL SET UP

IMPORTANT: Before proceeding to the next step ensure the pool is
fully set up and filled with water following the pool owner's manual.

1. Fully open the two dovetail

screws (5) and attach a pole
bracket (7) and a U-bolt (2) to a
rectangular metal frame pool center
"U-shape" leg along the length of the
pool. Make sure the pole bracket (7)
is securely attached to the
"U-shape" leg.

2. Secure the pole bracket (7) to the

"U-shape" leg with the U-bolt (2) and
two nuts (3). Clockwise tighten the
dovetail screws (5) using your fingers
only. NOTE: Do not over tighten or
use tool such as pliers.

3. Insert the assembled volleyball pole

into the pole bracket (7). Secure the
pole to the bracket with a long
Pin (1). Clockwise screw in the two
control screws (4) to adjust the pole
vertically position. NOTE: Adjust the
pole inclination by adjusting the
two control screws (4). Do not over
tighten or use tool such as pliers.

4. Attach two volleyball net

fasteners (10) to the volleyball pole.
Ensure the volleyball net
fasteners (10) are facing outward.

5. Locate the opposite "U JOINT" and

attach the second pole bracket (7)
to the "U JOINT", repeat steps #1
to #4.

6. Attach one side of the Volleyball

Net (11) starting from the top
Volleyball Net Fastener (10) and
then the bottom fastener. Loop the
rope around the fastener (10)
several times and secure the end of
the rope to the two notches in the
fastener. NOTE: Adjust the length of
the rope to be looped around the
fasteners depending on the size of
the pool. Repeat this procedure for
the other pole.

4

1

3

2

5

2

7

1

Pool

“U-shape”

leg

3

1

2

3

2

1

4

7

5

2

3

7

1

4

2

3

4

4

8

Vertical Adjustment

10

4

5

10

2

1

6

10

11

Advertising