Intex Pool Volleyball Set for Sequoia Spirit Pool Set 2012 - Manual (Page 3)

(180PO) POOL VOLLEYBALL SET MANUAL (FOR SEQUOIA SPIRIT™ POOL SET) ENGLISH 4.875” X 7.25” PANTONE 295U 11/18/2011
180
PO
S AVE THESE INSTRUCTIONS
Page 6
(180PO) POOL VOLLEYBALL SET MANUAL (FOR SEQUOIA SPIRIT™ POOL SET) ENGLISH 4.875” X 7.25” PANTONE 295U 11/18/2011
180
PO
S AVE THESE INSTRUCTIONS
Page 5
SS
EE
TT
--UU
PP
II
NN
SS
TT
RR
UU
CC
TT
IIOO
NN
SS
POOL VOLLEYBALL SET UP (continued)
SS
EE
TT
--UU
PP
II
NN
SS
TT
RR
UU
CC
TT
IIOO
NN
SS
POOL VOLLEYBALL SET UP
IMPORTANT: Before proceeding to the next step ensure the pool is
fully set up and filled with water following the pool owner's manual.
1. Fully open the two dovetail screws
and attach a pole bracket (1) to a
Sequoia Spirit™ pool set top board.
Make sure the pole bracket (1) is
securely attached to the top board.
2. Tighten the two dovetail screws
back using your fingers only.
NOTE: Do not over tighten or use
tool such as pliers.
3. Attach two volleyball net
fasteners (3) to the volleyball pole.
Ensure the volleyball net
fasteners (3) are facing outward.
1
3
4
1
2
1
1
2
3
4. Insert the volleyball pole into the
pole bracket (1). Secure the pole
to the bracket with long pin (2).
5. Locate the opposite top board"
of the Sequoia Spirit™ pool set
and attach the second pole
bracket (1) to the top board,
repeat steps #2 to #4.
6. Attach one side of the volleyball
net (6) starting from the top
volleyball net fastener (3) and
then the bottom fastener. Loop
the rope around the fastener (3)
several times and secure the end
of the rope to the two notches in
the fastener.
NOTE: Adjust the length of the
rope to be looped around the
fasteners depending on the size
of the pool. Repeat this procedure
for the other pole.
2
1
2
4
4
5
2
1
6
3
1