Intex JR. TWIN ROLL´N GO AIRBED KIT - Manual (Page 2)

69PO 69PO 69PO
(69PO) 3 IN 1 VALVE ENGLISH 4.875” X 7.25” 10/21/2013
SAVE THESE INSTRUCTIONS
Page 3
©2013 Intex Marketing Ltd. - Intex Development Co. Ltd. - Intex Trading Ltd. - Intex Recreation Corp.
All rights reserved/Tous droits réservés/Todos los derechos reservados/Alle Rechte vorbehalten.
Made in China/Fabriqué en Chine/Hecho en China/Hergestellt in China.
®™ Trademarks used in some countries of the world under license from/®™ Marques utilisées dans certains pays sous licence de/Marcas registradas
utilizadas en algunos países del mundo bajo licencia de/Warenzeichen verwendet in einigen Ländern der Welt in Lizenz von/ Intex Marketing Ltd. to/à/a/an Intex
Trading Ltd., Intex Development Co. Ltd., G.P.O Box 28829, Hong Kong & Intex Recreation Corp., P.O. Box 1440, Long Beach, CA 90801 • Distributed in the
European Union by/Distribué dans l’Union Européenne par/Distribuido en la unión Europea por/Vertrieb in der Europäischen Union durch/ Intex Trading B.V.,
Venneveld 9, 4705 RR Roosendaal – The Netherlands Consumer Service 1-800-234-6839
www.intexcorp.com �
Fig 8 Fig 9
Fig 10
TO DEFLATE
16. Press the two tabs inwards on
each side of the quick-exhaust
cap and pull outwards to open.
See Fig 8 - 9.
17. For packaging purpose, you
may use an air pump to remove
the remaining air completely
from the airbed. See Fig 10.
18. When the product is completely deflated, replace the quick-exhaust cap back.
See Fig 11-a & 11-b.
IMPORTANT: Press down both tabs to ensure the "quick-exhaust cap"
is firmly secured onto the sitting base. Notice the "CLICK" sound from
both tabs.
Fig 11 b
"CLICK" "CLICK"
CLICK
a