Jas-Audio ORIOR - Manual (Page 4)

Unique-Crossover and the switching Key
· Utilizes a 2nd order filter for bass and a
modified 3rd order filter for treble
• Highest quality components have been used,
time aligned of all drivers.
• Two selectable Designer-Precision-modes:
[ Reference ] or [ Dynamic ] operational
crossover network to optimize for your amplifiers.
Find the best setting that fit your own system,
listen to the different carefully by
inserting a key at
the back switch and turn to the indicated setting
mark . Pair of switching keys have been attached
in the Orior packing-box already.
Drivers
• Pure aluminum twin-ribbon tweeter
• High quality ceramic cone
midrange/bass drivers
• Computer designed, acoustically
contoured tweeter faceplate
· Precisely machined and
acoustically optimized bass port
Connections – Initial installation
The cables used to connect the speakers to the power amplifier can have a
significant effect on the sound of your audio system. Your authorized JAS
Audio dealer can recommend the appropriate speaker cables for your audio
system setup.
Each speaker has two terminals on the rear panel. The terminals are binding
posts that accept either spade lugs, pins and banana plugs.
Make sure the cables connected to both speakers are in phase with each
other: connect the (+) binding post on the amplifier to the (+) terminal on the
speaker, and the (-) binding post on the amplifier to the (-) terminal on the
speaker.
Page 4 of 7
http://www.jas-audio.com