Jas-Audio ORIOR GRAND User Manual
Page 4
Two caution on your speakers’near placing:
I.
Do not place any kinds of metal pieces, such as: keys, needles,
staples... etc. near or closed to the ORIOR GRAND＇s tweeter units,
because the magnetic field can cause a strong attractive force to
damage the speaker.
II.
Do not use vacuum cleaner on the speaker drivers; on the other hand,
do not direct coupling the speaker drivers by strong air via
compression gun. Any extreme blowing may damage the speakers.
If you feel the speakers sounded very muffled and distant (abnormal); as if,
please double check
all tweeter unit were covered by
the
Transparent-
Protective-Sheets or not?
Product Features
C
abinet
•
High quality MDF (Medium Density Fiber-board)
•
Inner horizontal plane bracing adds extreme rigidity
•
Pure natural wool for the best vibration, resonance
damping feeders with individual adjustable spikes
•
Top grade authentic wood veneer with polyester
piano finish
•
Custom machined, high current binding posts
Unique-Crossover
4
·
Utilizes a 2nd order filter for bass and a
modified 1st order filter for treble
•
Highest quality components have been used,
time aligned of all drivers.
·
Two selectable
Designer-Precision-modes:
[
Reference
] or [
Dynamic
] operational
crossover network to optimize for your amplifiers.
Find the best setting that fit your own system,
listen to the different carefully by
inserting a key
at the back switch and turn to the indicated
setting mark
. Pair of switching keys have been
attached in the Orior Grand packing-box already.
Drivers
Page 4 of 8
http://www.jas-audio.com