Jas-Audio ARRAY 2.1 SE - Manual (Page 3)

Features of Array 2.1 SE 300B/805 Integrated/ Power Amplifier
ƒ Selected and matched 300B, 805 and 6922 tubes
ƒ Can be switched between Integrated amplifying mode (Blue light on switches
will glow) and Power amplifying mode (RED light on switches will glow) by
pushing the two toggle switches to the same direction of the desired
mode (indicated as Bypass and Integrated) on the back panel
ƒ A remote control featuring volume control function and muting is supplied
ƒ Four line stage stereo inputs (Integrated amplifying mode)
ƒ One line stage stereo inputs (Power amplifying mode)
ƒ Separate wide-band audio power transformers
ƒ Separate wide-band audio output transformers
ƒ All transformers are electrically isolated and mechanically shock-mounted
ƒ Additional internal damping material for added control of mechanical resonance
ƒ 4 and 8-ohm output impedance taps for optimum speaker impedance matching
ƒ The internal wiring circuit is welded through completely manual lap welding,
with uniform and firm welding points. All insulating wires are silver-plating
flame retarding wires
ƒ Vibration-absorbing elastomer feet
ƒ Fuse protect amplifier circuit in case of over current
Page 3 of 5
http://www.jas-audio.com