Digital select calling (dsc) operation – Cobra Electronics MARINE MR F75-D User Manual
Page 30
Nothing
Comes Close to a Cobra
®
Digital Select Calling (DSC)
Operation
55
54 English
Digital Select Calling (DSC)
Operation
6. Press the Call/Set button.
Your radio will send the position request and there
will be one (1) of three (3) possible responses:
■
You will receive the position.
■
You will receive a no position data response,
meaning the station you queried is not connected
to a GPS device and cannot send its position.
■
You will receive a no reply response, meaning the
operator of that station has chosen not to reply
to your request.
Choose one (1) of the following:
If You Receive A Position:
The requested position with the station name
and MMSI will show on your screen.
Press the Call/Set button to return to Standby
mode after you have noted the station’s position.
If The Station You Called Cannot Send Its Position:
NO POS. DATA
(no position data) will show
on your screen.
1) Press the Call/Set button to return to the
Individual Directory menu.
2) Use the Up/Down buttons to scroll to
EXIT
.
3) Press the Call/Set button to return to the
Call Send menu.
4) Use the Up/Down buttons to scroll to
EXIT
.
5) Press the Call/Set button to return to
Standby mode.
If The Station You Called Chose Not To Reply:
NO REPLY
will show on your screen.
You will have two (2) choices:
■
RESEND
the request.
■
EXIT
the Position Request mode.
To Resend Your Position Request:
1) Use the Up/Down buttons to scroll to
RESEND
.
2) Press the Call/Set button.
To Exit The Position Request Mode:
1) Use the Up/Down buttons to scroll to
EXIT
.
2) Press the Call/Set button to return to the
Individual Directory menu.
3) Use the Up/Down buttons to scroll to
EXIT
.
4) Press the Call/Set button to return to the
Call Send menu.
5) Use the Up/Down buttons to scroll to
EXIT
.
6) Press the Call/Set button to return to
Standby mode.
Receiving a Position
No Position Data
Resend The Request
Operating Your Radio
Operating Your Radio
Position Request
Sending A Position Request
continued
F75D_OPERATION:F75-Operation-8 12/13/10 3:52 PM Page 54