Jaypro Sports OS-350 - Manual (Page 3)

JAYPRO SPORTS
OUTDOOR COMBINATION GAME STANDARD, OS-350
LIST OF MATERIALS
PIECE NO. PART NO. DESCRIPTION QTY.
1 OS351 Upright 2
2 HN263 Wing Nut 5/16”-18 4
3 AF65 Top Cap 2
4 HB201 Eyebolt 5/16”-18 X 4” 4
5 HS1243 Hex Head Bolt 3/8”-16 X 3 ¼” 1
6 HN265 Locknut 3/8”-16 1
7 AS-302RP Winch With Collar 1
8 HS278 Hex Head Bolt ¼”-20 X 1 ¼” 1
9 AF737 Pulley 1
10 HM225 Pulley Hanger 1
11 HN256 Locknut ¼”-20 1
12 AF1507a 3-Piece Top Cap 2
13 GSA2375 Ground Sleeve 2
14 RP1223 Plastic Bottom Cap 2
15 OS24 Winch Strap 1
TOOLS REQUIRED: ½” Box Wrench
9/16” Box Wrench (2) Or,
Adjustable Wrench (2)
IMPORTANT NOTE
This unit is designed for practice use only. Any attempt to gain competition net height
through excessive tension may damage the equipment. Read all instructions carefully
before using this unit.
Set ground sleeves at dimensions referenced below:
Volleyball-
35’-5” Center-To-Center
Badminton- 23’-5” Center-To-Center
Tennis- 42’-5” Center-To-Center
OS-350G GROUND SLEEVE INSTALLATION
1) Dig square hole 30” deep by 18” wide.
2) Pour concrete.(see following cement mixture)
3) Insert sleeve 24” deep. (length of sleeve)
4) Recess sleeve by ¼” so top cap is flush with playing surface.
5) Be sure sleeve is plumb.
6) Let cure for minimum of 72 hours.