Casio WK225 User Manual

Page 24

Advertising
background image

Sampling Sounds and Playing Them on the Digital Keyboard

E-22

You can apply various effects to sampled sounds.

1.

Press

bn

(TONE) and then use

br

(10-key) to

enter the tone number (601 to 605) to which you
want to apply effects.

2.

Press

bn

(TONE) to cycle through the available

effects, described below.

• Avoid assigning the same sampled sound to the keyboard

for play along and for looped play. Doing so will cause, the
Loop 1 effect to be applied to the keyboard tone while
looped play of the sampled sound is being performed.

You can use the procedure to change the drum sounds that
are assigned to each keyboard key.

• You can store up to three drum sets and store them as tone

numbers 606, 607, and 608. Simply select the tone number
where the drum set you want is located to assign the drum
set sounds to the keyboard.

1.

Press

bo

(RHYTHM).

2.

Press

bn

(TONE) and then use

br

(10-key) to

enter the tone number (606, 607, or 608) for the
drum set whose sounds you want to change.

3.

Press

cr

and

cs

at the same time.

Applying Effects to a Sampled Sound

Effect Type

(Display)

Description

Original (Orgnl)

Normal sampled tone (no looping, no
effect).

Loop 1 (Loop1)

Loops the sampled sound.

Loop 2 (Loop2)

Loops the sample sound and raises the
pitch of the resonating sound when the
keyboard key is released.

Loop 3 (Loop3)

Loops the sample sound and lowers the
pitch of the resonating sound when the
keyboard key is released.

Pitch 1 (Ptch1)

Changes the pitch from low to high, at an
increasing rate.

Pitch 2 (Ptch2)

Changes the pitch from high to low, at a
decreasing rate.

Pitch 3 (Ptch3)

Changes the pitch from high to low, at a
decreasing rate, and then raises the pitch
when the key is released.

Tremolo (Treml)

Alternates volume between high and low.

Funny 1 (Funy1)

Adds vibrato and changes the pitch by a
gradually increasing amount.

Funny 2 (Funy2)

Alternates between high pitch and low
pitch.

Funny 3 (Funy3)

Adds vibrato and changes the pitch from
low to high.

Incorporating a Sampled Sound
into a Drum Set (Drum Sampling)

N o

D a t a

Lights

N o

D a t a

Flashes

Advertising
This manual is related to the following products: