Autostickĥ, Operation, Autostick – Jeep 2012 Compass User Manual

Page 308

Advertising
background image

AUTOSTICK

AutoStick

௡ is a driver-interactive transmission that offers

six manual ratio changes to provide you with more
control. AutoStick

௡ allows you to maximize engine brak-

ing, eliminate undesirable upshifts and downshifts, and
improve overall vehicle performance. This system can
also provide you with more control during passing, city
driving, cold slippery conditions, mountain driving,
trailer towing, and many other situations. Automatic ratio
changes upward will only occur to protect the Continu-
ously Variable Automatic Transmission (CVT) and/or the
engine from overspeed. Changes down will only happen
at minimum engine speed to prevent stalling.

Operation

NOTE:

AutoStick

௡ is not available until the CVT warms

up in cold weather.

AutoStick

௡ operation is activated in the DRIVE position

by moving the shift lever side-to-side. Moving the shift

lever to the (+) side will activate AutoStick

௡ and shift up

to the next higher manual ratio, unless you are already
operating in or near Overdrive, in which case sixth gear
ratio will be selected. In like manner, moving the shift
lever to (-) will activate AutoStick

௡ and shift to the next

lower manual ratio. After AutoStick

௡ is activated, the

manual ratio selected is displayed in the transmission
ratio display and tipping the shift lever to the (+) or (-)
direction will cause an upshift or downshift by one ratio.

AutoStick

Is Deactivated:

• By holding the shift lever to (+) momentarily
• When the shift lever is shifted out of DRIVE
• When in sixth position, by touching the shift lever to

the right

• When heavy Anti-Lock Brake System (ABS) applica-

tion is detected

306

STARTING AND OPERATING

Advertising