Jeep 2011 Wrangler User Manual
Page 260
Advertising
2. Loosely attach the rear of the side bar to the sport bar.
Refer to Step 4 of “Lowering Windshield And Removing
Side Bars” earlier in this section.
• Reattach the sport bar Velcro covering.
3. Attach the front of the side bar to the windshield
frame.
• Install the top two hex bolts (13 mm) first, then the
lower side hex bolt (13 mm). The lower side bolt will
not align until the top two bolts are installed.
4. Tighten all side bar attachment bolts.
5. Install the lower windshield plates with the six black
round-headed Torx
head screws (using a #40 Torx head
driver) on each side of the base of the windshield.
258
UNDERSTANDING THE FEATURES OF YOUR VEHICLE
Advertising