Combi 7720 - Manual (Page 8)

-8 -
Using the Travel System
ATTACHING THE Travel System Guardrail
1. After removing the Guardrail, attach the Travel
System Guardrail by slipping it over the armrest
pins until you hear click into position. Gently tug
the side, to be sure it is secure.
2. Recline the backrest to the middle or lower
position.
3. Lock the “V” slot of the Combi Infant Car Seat /
Carrier over the Travel System Guardrail.
4. Rotate until the foot end of Combi Infant Car Seat
/ Carrier locks into the Infant Car Seat / Carrier
Locks located on each side of the handle. Push
down on the foot end of the seat to ensure
engagement.
5. Be certain that the Combi Infant Car Seat / Carrier
is securely attached to the stroller by lifting up on
the handle Combi Infant Car Seat / Carrier.
CAUTION
Pull on each side of the Travel System
Guardrail to make sure that it is secure.
Infant Car Seat / Carrier Lock
Note:
Ensure the
Travel System
Guardrail is
attached in
the proper
direction.