Canon ImageCLASS MF8050Cn - Manual (Page 110)

6-26
U
sing the F
ax F
unc
tions
4
Select <Fax Settings> with [ ] or [ ], and then
press [OK].
Communication Settings
Fax Settings
Memory Lock Settings
Select Country/Region
5
Select <Send Start Speed> with [ ] or [ ], and
then press [OK].
Fax Settings
Send Start Speed
Receive Start Speed
6
Select the send start speed with [ ] or [ ], and
then press [OK].
Send Start Speed
33600 bps
14400 bps
9600 bps
7200 bps
* When <Apply> appears in the screen, you need to select <Apply>
and press [OK] after specifying the setting.
7
Press [ ] (Menu) to close the menu screen.
The setting is complete.
Setting Items for the System Settings
The system settings for sending or receiving faxes include the
following items.
System Settings
Communications
Settings
Fax Settings
"Send Start Speed" ( →
P.6-26)
"Receive Start Speed" ( →
P.6-26)
"Select Country/Region"
( →P.6-26)
"Memory Lock Settings"
( →P.6-26)
Restrict Sending
"Address Book PIN" ( →
P.6-27)
"Restrict New
Destinations" ( →P.6-27)
"Allow Driver Faxing" ( →
P.6-27)
"Restrict Sending from
History" ( →P.6-27)
"Fax No. Confi rmation
Re-Entry" ( →P.6-27)
"Restrict Sequential
Broadcast" ( →P.6-27)
Send Start Speed
This function changes the send start speed, which is useful
when there is diffi
culty initiating the sending of a document.
How to display the settings
[ ] → <System Settings> → <Communications Settings>
→ <Fax Settings> → <Send Start Speed>
Settings
(Boldface: Default settings)
33600 bps, 14400 bps,
9600 bps, 7200 bps,
4800 bps, 2400 bps
Receive Start Speed
This function changes the receive start speed, which is useful
when there is diffi
culty initiating the receiving of a document.
How to display the settings
[ ]
→ <System Settings> → <Communications Settings>
→ <Fax Settings> → <Receive Start Speed>
Settings
(Boldface: Default settings)
33600 bps, 14400 bps,
9600 bps, 7200 bps,
4800 bps, 2400 bps
Select Country/Region
Specify a country or region where the machine is to be used.
IMPORTANT
After confi guration
Restart the machine to activate the settings.
How to display the settings
[ ] → <System Settings> → <Communications Settings>
→ <Fax Settings> → <Select Country/Region>
Settings
(Boldface: Default settings)
UnitedStates (US), Canada (CA),
Brazil (BR), Mexico (MX), Other
Memory Lock Settings
Received documents are normally printed immediately.
However, you can store the documents temporarily in memory
without printing. You can print the stored documents at any
time. If you do not need them, you can delete them, saving
paper to be used.
How to display the settings
[ ]
→ <System Settings> → <Communications Settings>
→ <Memory Lock Settings>