Crestron electronic DigitalMedia DMC-CATO-HD User Manual
Ccrreessttrro on n d dm mc c--c ca at to o--h hd d, Quad dm output card w/hdmi for dm switchers
C
Crreessttrro
on
n D
DM
MC
C--C
CA
AT
TO
O--H
HD
D
The DMC-CATO-HD is an output card for a Crestron DigitalMedia
™
Switcher,
providing four DigitalMedia (DM) outputs to feed up to four individual DM
receivers via CAT5e/6 or DigitalMedia cable*.
The DMC-CATO-HD also provides two local HDMI outputs, configured in parallel
with DM Outputs #1 and #3. Each HDMI output carries the same audio and video
signals as its companion DM output, perfect for feeding a centralized audio
processor and remote display device simultaneously.
SPECIFICATIONS
Connectors
D
DM
M 1
1 –
– 4
4: (4) DM outputs, each composed of (2) 8-pin RJ45 female;
Connect to DM inputs of DM receivers or other DM devices via DM-CBL or CresCAT-D cable*
H
HD
DM
MII 1
1,, 3
3: (2) 19-pin Type A HDMI female;
Construction
Plug-in card, occupies (1) DM Switcher output card slot, includes steel faceplate w/black
matte powder coat finish
Weight
11.5 oz (326 g)
* For DigitalMedia wiring, use DM-CBL DigitalMedia Cable, CresCAT-D, or quality
CAT5e/CAT6 cable. Do NOT use low-skew cable. The maximum allowable cable
lengthdepends on multiple factors. One or more DM Repeaters (Model DM-DR)
may be required. Refer to the Crestron DigitalMedia Design Guide, Doc. #4789
for complete wiring guidelines.
Quad DM Output Card
w/HDMI for DM Switchers
www.crestron.com
|
800.237.2041
Crestron Electronics, Inc. 15 Volvo Drive
l
Rockleigh, NJ 07647
Tel: 800.237.2041 / 201.767.3400
l
Fax: 201.767.1903
Specifications subject to change without notice. Doc.4772 01/09
©2009 Crestron Electronics, Inc. All brand names, product names and trademarks are the property of their respective owners.