Crestron electronic CNX-PBVR4 - Manual (Page 6)

Professional Balanced Video Receiver Crestron CNX-PBVR4
Specifications
Specifications for the CNX-PBVR4 are given in the following table.
CNX-PBVR4 Specifications
SPECIFICATION DETAILS
Power Requirements 24 VDC, 1A, 24W (Power Pack, PW-2410, included)
Video
Signal Type
Gain
Bandwidth
Composite Video
S-Video
Component Video
S/PDIF Digital Audio
Unity
50 MHz
CAT5 Input Cable Length from
CNXRMCLV Up to 300 feet maximum.
Video Input
Input Video Type
Connector
Impedance
Voltage Level
Balanced
Shielded RJ-45 (8-pin) Female
100 Ohms
0.3V to 2Vp-p with no offset
Video Output
Output Video Type
Connector
Impedance
Voltage Level
Unbalanced
RCA Female
75 Ohms
0.3V to 2Vp-p with no offset
Environmental Temperature &
Humidity 41° to 113°F (5° to 45°C)
10% to 90% RH (non-condensing)
Dimensions & Weight Height: 1.7 in (4.32 cm) (1 rack space)
Width: 19.0 in (48.26 cm) – with ears
17.03 in (43.24 cm) – without ears
Depth: 6.67 in (16.94 cm)
Weight: 2.88 lb (1.29 kg)
Physical Description
The CNX-PBVR4, shown below, is housed in a black enclosure with labeling on
front and back panels. Refer to the physical views shown after this paragraph.
CNX-PVID8x4 Physical Views
17.025 in
(43.24 cm)
6.671 in
(16.94 cm)
1.70 in
(4.32 cm)
2 • Professional Balanced Video Receiver: CNX-PBVR4 Operations Guide – DOC. 8184