Denver router in slot 3, Quick start guide – Carrier Access Terminal Server Router User Manual
Page 16
16
Terminal Service Router - Release 1.3
Quick Start Guide
Back-to-Back with Frame Relay
Denver Router in Slot 3
Command
Description
set 3 default
Set Router to default settings
disconnect a:1
Disconnect all connections to the T1 on the
Controller (slot a)
disconnect 3
Disconnect all connections to the router in slot 1
set clock1 a:1
Set primary master transmit clock source
set a:1:all type data
Set the T1-1 of the Controller, Type to Data
connect a:1:all 3:1:1
Connect all of T1-1 to the Router that is in slot 1
rename 3 "LocalUnit" "Denver"
Rename the Axxius 800 from "LocalUnit"
(default) to "Denver" (LAN)
rename 3 "RemoteUnit" "wan1"
Rename WAN #1 from "RemoteUnit" (default) to
"wan1"
set 3:1 ip address 2.2.2.1
255.255.255.0
Set the ethernet IP address, in the conventional IP
address format. (Router LAN)
add 3 "wan1" static ip network
1.1.1.0 255.255.255.0 1
Adds a static IP network (route) to the WAN
interface
set 3:1:1 encapsulation fr
Set the encapsulation on trunk 1 to Frame Relay
set 3 lmi disable
Disable LMI (Local Management Interface)
set 3 "wan1" trunk 1
Set the WAN interface named "wan1" to be
mapped to trunk 1
set 3 "wan1" dlci 101
Set the DLCI number
reset 3
Reboot the router, to enable all configurations set