Rsa secureid authentication, Safeword premieraccess authentication, Citrix presentation server and the web interface – Citrix Systems Citrix Access Gateway 4.2 User Manual

Page 6

Advertising
background image

6

Access Gateway Pre-Installation Checklist

RSA SecureID Authentication

To use an RSA/ACE server for authentication, there is no information to collect. Generate an ACE Agent
Host sdconf.rec file from the RSA/ACE Server Administration Interface and then upload that file to the
Access Gateway, as described in the Access Gateway Administrator’s Guide.

SafeWord PremierAccess Authentication

To use SafeWord PremierAccess for authentication, there is no information to collect. A SafeWord
configuration file is installed on the Access Gateway as described in the Access Gateway Administrator’s
Guide
.

Citrix Presentation Server and the Web Interface

16. Base DN.

DN under which users are located. For example, “ou=users, dc=ace, dc=com.

17. Logon name attribute.

Defaults to “sAMAccountName.” If using other directories, you might want to

set this to cn.

18. Group Info attribute.

Defaults to “memberOf.” This enables the Access Gateway to obtain the

groups associated with a user during authorization.

19. FQDN or IP address of the server running the Secure Ticket Authority.

These values are needed only if you are using Citrix Presentation Server and

the Web Interface.

20. FQDN or IP address of the server running the Web Interface.

These values are needed only if you are using Citrix Presentation Server and

the Web Interface.

Advertising