Clarion VRX756VD - Manual (Page 64)

English
Installation and Wire connection manual
66
VRX756VD
280-8207-00
3.
GENERAL CAUTIONS
4.
CAUTIONS ON INSTALLATION
1. Do not open the case. There are no user
serviceable parts inside. If you drop anything
into the unit during installation, consult your
dealer or an authorized CLARION service
centre.
2. Use a soft, dry cloth to clean the case. Never
use a rough cloth, thinner, benzine, or
alcohol, etc. For tough dirt, apply a little cold
or warm water to a soft cloth and wipe off the
dirt gently.
1. Prepare all articles necessary for installing
the main unit before starting.
2. This model is used with the liquid crystal
panel slid forwards (shell loading system).
On some types of cars, the liquid crystal
panel may touch the dashboard or shift lever,
in which case it cannot be installed. Check
that the set will not hamper operation of the
shift lever before choosing the place of
installation.(Figure 2)
5. Use the enclosed screws for installation.
Using other screws can cause damage.
(Figure 4)
3. Install the unit within 30° of the horizontal
plane. (Figure 3)
4. If you have to do any work on the car body,
such as drilling holes, consult your car dealer
beforehand.
6. The source unit has mounting screw holes
for NISSAN (N marks) and TOYOTA (T
marks) vehicles.
Dashboard
Shift lever
Shift lever
(check that it does not
touch the LCD.)
Figure 2
Max. 30˚
Figure 3
Chassis Chassis
Damage
Max. 8 mm (M5 screw)
Figure 4
Figure 5
T
N N T
N T
+VRX756VD-065-Eng-Inst 05.1.18, 1:04 PM 66