ClearOne comm Battery - Manual (Page 4)

Technical Support: 1 (219) 929-4127
4 Digital-1 User’s Guide
How to Use Digital-1
Operating Intructions:
❏ ❏ ❏ ❏ ❏ Step 1
Plug the earphone into the earphone jack.
The earphone cable also acts as the receiver
antenna. Extend the cable fully for the best
reception and least interference.
❑ ❑ ❑ ❑ ❑ Step 2
Turn on the receiver by rotating the volume wheel.
The red power LED will light up. This indicates
that the receiver is ON and the batteries are
properly charged.
WARNING!
To avoid harm to ears, keep all receivers
OFF until the transmitter is operating at
full power. Keep volume setting at low to
mid-range at all times.