Casio CDP-120 - Manual (Page 13)

English
E-11
Reference
Troubleshooting
Symptom Action
Included Accessories
I can’t find something that should be here. Carefully check inside all of the packing materials.
Power Requirements
Power will not turned on. Correctly attach the AC adaptor (page E-4).
Sound
Nothing happens when I press any keyboard key. Adjust the volume setting (page E-5).
Notes keep sounding, without stopping. Turn power off and then back on to initialize all Digital Piano settings
(page E-5).
Some notes are cut off while they are playing. Notes are cut off whenever the number of notes being sounded
exceeds the maximum polyphony value of 48 (24 for some tones).
This does not indicate malfunction.
The volume or tone setting I made has changed. • Adjust the volume setting (page E-5).
• Turn power off and then back on to initialize all Digital Piano
settings (page E-5).
Output volume does not change even though is
change my keyboard touch. • Change the Touch Response setting (page E-6).
• Turn power off and then back on to initialize all Digital Piano
settings (page E-5).
In certain keyboard ranges, the volume and tone
quality sound are slightly different from those in other
keyboard ranges. This is due to system limitations. It does not indicate malfunction.
With some tones, octaves do not change at the far
ends of the keyboard. This is due to system limitations. It does not indicate malfunction.
The pitch of the notes does not match other
accompanying instruments or sounds strange when
played long with other instruments. • Check and adjust the transpose (page E-8) and tuning settings
(page E-8).
• Turn power off and then back on to initialize all Digital Piano
settings (page E-5).
The reverb of notes seems to change suddenly. • Check and adjust the reverb setting (page E-7).
• Turn power off and then back on to initialize all Digital Piano
settings (page E-5).
Computer Connection
I can’t exchange data between the Digital Piano and
a computer. • Check to make sure that the USB cable is connected to the Digital
Piano and computer, and that the device is selected correctly with
your computer’s music software settings (page E-9).
• Turn off the Digital Piano and then exit the music software on your
computer. Next, turn the Digital Piano back on and then restart the
music software on your computer.
CDP120_e.book 11 ページ ２０１１年４月２０日 水曜日 午後１２時５５分