Firmware upgrade and factory reset – Clipcomm CWP-100 User Manual
Page 37
36
10. Firmware Upgrade and Factory Reset
You easily upgrade the new firmware with a simple process.
10.1. Firmware Upgrade via Display Menu
You can upgrade the firmware with the CWP-100 LCD display menu. This process is available only when the
network is in normal state and connected properly.
①
Select MENU and follow the steps as “4: Extra Setting” ”7: Firmware”.
1: Load Default.
2: Firmware Ver.
3: Firmware Update
4: Update Server
②
Select “2. Firmware Ver.” to check the current firmware version.
③
Select “4. Upgrade Server” to check the server address for the upgrade.
④
Select “3. Firmware Update” to start upgrading the firmware.
CAUTION: Do not interfere until upgrading the firmware is completed. Upgrading procedure
normally takes about one minute. The system will restart automatically when the process is
completed.
10. Firmware Upgrade and Factory Reset